First thing to verify is that no monitored entrapment devices are creating the problem.
Press the Open/Close button on the control board. If gate does not operate proceed to step 2.
Press the Type D S4 push button and hold to operate the gate.
If gate operates while pressing the S4 button then a monitored device is preventing normal operation.
If control board clicks and gate does not operate the battery needs to be load tested, replace or charge as necessary
Identify monitored devices connected and check for proper operation.
Verify monitored entrapment device switches are set correctly. See installing monitored entrapment devices section of the manual. Patriot Gate Opener Manuals