Patriot - Dual Gate Opens or Closes then Immediately Reverses Direction

Patriot - Dual Gate Opens or Closes then Immediately Reverses Direction

Verify that the gates are not crossing the path of the photo eye.

1. This is most likely caused by an incorrect limit switch adjustment. First determine which gate is in need of adjustment.
2. Locate the DS1 switches on the Patriot control board. Switch 3 and 4 should be turned on for a dual gate, turn off switch 4. This will disable one gate.
3. Operate the gate and verify that it stops in the correct position. If so then turn switch 4 back on and turn switch 3 off. Operate the other gate now and verify that it stops in the correct position. One or both may not stop in the correct position.
4. Once the gate that needs adjustment is identified (possibly both) refer to problem 10 above steps b through e for instructions.