Patriot
How to Correct the Limit Gear Spacing on a Patriot Actuator
Overview The gear spacing problem is when the blue worm gear on the actuator arm and the white gear on the retract limit shaft (a part of the limit assembly) are not meshed together well enough. This causes the limits to stop moving while the ...
How to Interlock Two Patriot Control Boards
Overview Two USAutomatic Patriot Control boards can be wired together so that when one gate is open, the other gate is forced to remain closed. This is done with a few wires between the J2 terminal and the Security Shunt terminal block on each board. ...
How to Wire a Knox/Fire Box Emergency Open Switch to a Patriot Gate Opener
Overview In this article you will learn how to wire a Knox/Fire Box Emergency Open Switch to a Patriot Gate Opener. This type of device is used to allow your local fire department entry to the property in the event of an emergency. We recommend ...