How to Remove an Access Code from a Premium Metal Wireless Keypad

How to Remove an Access Code from a Premium Metal Wireless Keypad

Overview

In this article you will learn how to remove an individual access code from a premium wireless keypad. This is done if the keypad has multiple access codes programmed but only a single code needs to be removed. An example of this process will be provided at the end of the article.

Applies to Part Number(s)

  1. 050551

Procedure

Enter the Master Password Then Press 7

The default master password is "11111". The keypad will give 2 short beeps if this step is done correctly. If you get a long beep at this step, your master password may be incorrect.
To reset the master password back to the default, refer to this article: How to Reset the Master Password Back to Default on a Basic Wireless Keypad

Enter the Access Code to be Removed and Then Press 7

Make sure to include the # sign if your code ends with a #.

Re-enter the Access Code to be Removed and Then Press 7

The keypad will gives 2 short beeps indicating the code has been removed successfully.
Type the deleted code in and confirm the keypad no longer beeps rapidly and that the gate no longer operates.

Example:

The access code in this example will be "1234#" and the master password is the default.
  1. Enter the master password then press 7
    1. 11111
    2. 7
    3. 2 short beeps
  2. Enter the code to be removed then press 7
    1. 1234#
    2. 7
  3. Re-enter the the code to be removed then press 7
    1. 1234#
    2. 7
    3. 2 short beeps