How to Pair a Wireless Push to Operate Button to the Receiver

How to Pair a Wireless Push to Operate Button to the Receiver

Overview

In this article you will learn how to pair a wireless push to operate button to the radio receiver. This process involves pressing a button on the receiver at the same time as activating the push to operate button. The button either needs to be in front of the gate opener's cabinet or a second person can be used to activate the button from where it is mounted.

Applies to Part Number(s)

  1. 030215
  2. 050510

What You Need

  1. A small flat-head screwdriver to remove the push to operate button.
    1. A second person can be used in place of removing the button.
  2. A long and narrow tool of some sort (paperclip, toothpick, etc.)

Procedure

Press and Hold P1 or P2 on the Radio Receiver Using the Narrow Tool

Use P1 if the desired behavior is to open and/or close the gate.
Use P2 if the desired behavior is to latch the gate open.
A green LED will turn on after about a second of holding the receiver's button.

Activate the Push to Operate Button

While the green LED on the receiver is still on, activate the button. If timed correctly, the receiver will click and the gate will operate, indicating a successful pair. If the green LED turns off before the button is activated, try again.